Dell 2707WFP Flat Panel Monitor
|
1
|
Input indicators |
|
2
|
Input Source Select |
|
3
|
PIP (Picture In Picture) / PBP (Picture By Picture) Select |
|
4
|
OSD Menu / Select |
|
5
|
Brightness / Contrast Hotkey and Down (-) button |
|
6
|
Auto Adjust and Up (+) button |
|
7
|
Power button (with power light indicator) |
|
1
|
Barcode serial number label
|
Indicates the service part number for the monitor.
|
|
2
|
Security lock slot |
Use a security lock with the slot to help secure your monitor. |
|
3
|
Dell Soundbar mounting brackets |
Attach the optional Dell Soundbar. |
|
4
|
Regulatory rating label |
List the regulatory approvals. |
|
5
|
Service tag label |
Refer to this label if you need to contact Dell for technical support. |
|
6
|
Connectors label |
Indicate the positions and types of connectors. |
|
7
|
VESA mounting holes (100mm)
|
Use to mount the monitor.
|
|
8
|
Cable management hole |
Help organize cables by placing them through the hole. |
|
1
|
AC power cord connector |
|
2
|
DC power connector for Dell Soundbar |
|
3
|
DVI connector |
|
4
|
VGA connector |
|
5
|
Composite video connector |
|
6
|
Component video connector - Y |
|
7
|
S-Video connector |
|
8
|
USB upstream port |
|
9
|
USB downstream ports |
|
10
|
Component video connector - Pr |
|
11
|
Component video connector - Pb |
General
|
|
| Model number |
2707WFP |
|
|
|
| Screen type |
Active matrix - TFT LCD |
| Screen dimensions |
27 inches (27-inch viewable image size) |
| Preset display area: |
|
Horizontal |
581.96 mm (22.9 inches) |
Vertical |
363.60 mm (14.30 inches) |
| Pixel pitch |
0.303 mm |
| Viewing angle |
+/- 89° (vertical) typ, +/- 89° (horizontal) typ
|
| Luminance output |
450 cd/m ²(typ)
|
| Contrast ratio |
1000:1 (typ)
|
| Faceplate coating |
Antiglare with hard-coating 3H
|
| Backlight |
16 CCFLs Direct-type backlight, 92% wide color gamut |
| Response Time |
6 ms typical (Grey to Grey) / 16 ms typical (Black to White) |
|
|
|
| Horizontal scan range |
30 kHz to 81 kHz (automatic) |
| Vertical scan range |
56 Hz to 76 Hz, exception 1680 x 1200 & 1920 x 1200 at 60 Hz only |
| Optimal preset resolution |
1920 x 1200 at 60 Hz (VESA CVT-R Mode) |
| Highest preset resolution |
1920 x 1200 at 60 Hz (VESA CVT-R Mode) |
| |
|
|
Video Supported Modes
|
|
| |
|
| Video display capabilities (DVI playback) |
480p/576p/720p/1080p(Supports HDCP) |
| Video display capabilities (Composite playback) |
NTSC/PAL |
| Video display capabilities (S-Video playback) |
NTSC/PAL |
| Video display capabilities (Component playback) |
480i/480p/576i/576p/720p/1080i |
| |
|
|
Dell guarantees image size and centering for all preset modes listed in the following table.
|
Display Mode
|
Horizontal Frequency (kHz)
|
Vertical Frequency (Hz)
|
Pixel Clock (MHz)
|
Sync Polarity (Horizontal/Vertical)
|
| VGA, 720 x 400 |
31.5 |
70.1 |
28.3 |
-/+ |
| VGA, 640 x 480 |
31.5 |
59.9 |
25.2 |
-/- |
| VESA, 640 x 480 |
37.5 |
75.0 |
31.5 |
-/- |
| VESA, 800 x 600 |
37.9 |
60.3 |
40.0 |
+/+ |
| VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
| VESA, 1024 x 768 |
48.4 |
60.0 |
65.0 |
-/- |
| VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
| VESA, 1152 x 864 |
67.5 |
75.0 |
108.0 |
+/+ |
| VESA, 1280 x 1024 |
64.0 |
60.0 |
108.0 |
+/+ |
| VESA, 1280 x 1024 |
80.0 |
75.0 |
135.0 |
+/+ |
| VESA, 1600 x 1200 |
75.0 |
60.0 |
162.0 |
+/+ |
| VESA, 1920 x 1200 |
74.0 |
60.0 |
154.0 |
+/- |
|
|
|
|
| Video input signals |
Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance with HDCP support.
S-video, Y input 1 volt (p-p), C input 0.286 volt (p-p), 75 ohm input impedance
Composite, 1 volt (p-p), 75 ohm input impedance
Component: Y, Pb, Pr are all 0.5~1volt (p-p), 75 ohm input impedance
|
| Synchronization input signals |
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
|
| AC input voltage / frequency / current |
100 to 240 VAC / 50 or 60 Hz + 3 Hz / 3.0A |
| Inrush current |
120V: 40A (Max.)
240V: 80A (Max.) |
|
|
|
| Signal cable type |
D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor
S-video: Not included with display
Composite: Not included with display
Component: Not included with display
|
| Dimensions (with stand): |
|
Height (Fully extended ) |
532.75 mm (20.97 inches) |
Height (Compressed) |
441.80 mm (17.39 inches) |
Width |
634.00 mm (24.96 inches) |
Depth |
243.15 mm (9.57 inches) |
| Weight |
|
Monitor (Stand and Head)
|
12.5 Kg (27.5 lb) |
Monitor Flat panel only (VESA Mode)
|
8.5 Kg (18.7 lb) |
Weight with packaging
|
16.0 Kg (35.28 lb) |
|
|
|
| Temperature: |
|
Operating |
5° to 35°C (41° to 95°F) |
Non-operating |
Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F) |
| Humidity: |
|
Operating |
10% to 80% (non-condensing) |
Non-operating |
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing) |
| Altitude: |
|
Operating |
3,657.6 m (12,000 ft) max |
Non-operating |
12,192 m (40,000 ft) max |
| Thermal dissipation |
375.0 BTU/hour (maximum)
195.0 BTU/hour (typical) |
| If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature: |
|
VESA Modes
|
Horizontal Sync
|
Vertical Sync
|
Video
|
Power Indicator
|
Power Consumption
|
| Normal operation |
Active |
Active |
Active |
Blue |
140W (maximum)*
75W (normal)** |
| Active-off mode |
Inactive |
Inactive |
Blanked |
Amber |
Less than 2 W |
| Switch off |
-
|
-
|
-
|
Off |
Less than 1 W (at 230 V) |
|
* With Audio + USB
** Without Audio + USB
|
| This monitor is ENERGY STAR®-compliant. |
 |
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
VGA Connector
|
Pin Number
|
15-pin Side of the Connected Signal Cable |
|
1
|
Video-Red |
|
2
|
Video-Green |
|
3
|
Video-Blue |
|
4
|
GND |
|
5
|
Self-test |
|
6
|
GND-R |
|
7
|
GND-G |
|
8
|
GND-B |
|
9
|
Computer 5V/3.3V |
|
10
|
GND-sync |
|
11
|
GND |
|
12
|
DDC data |
|
13
|
H-sync |
|
14
|
V-sync |
|
15
|
DDC clock |
DVI Connector
|
Pin Number
|
24-pin Side of the Connected Signal Cable |
|
1
|
TMDS RX2- |
|
2
|
TMDS RX2+ |
|
3
|
TMDS Ground |
|
4
|
Floating |
|
5
|
Floating |
|
6
|
DDC Clock |
|
7
|
DDC Data/span> |
|
8
|
Floating |
|
9
|
TMDS RX1- /span> |
|
10
|
TMDS RX1+ |
|
11
|
TMDS Ground |
|
12
|
Floating |
|
13
|
Floating |
|
14
|
+5V / +3.3V power |
|
15
|
Self test |
|
16
|
Hot Plug Detect |
|
17
|
TMDS RX0- |
|
18
|
TMDS RX0+ |
|
19
|
TMDS Ground |
|
20
|
Floating |
|
21
|
Floating |
|
22
|
TMDS Ground |
|
23
|
TMDS Clock+ |
|
24
|
TMDS Clock- |
S-video Connector
|
Pin Number
|
5-pin Side of the Connected Signal Cable (Cable not included) |
|
1
|
GND |
|
2
|
GND |
|
3
|
LUMA |
|
4
|
CHROMA |
Composite Video Connector
|
Pin Number
|
1-pin Side of the Connected Signal Cable (cable not included) |
|
1
|
LUMA COMPOSITE CHROMA |
Component Video Connector
|
Pin Number
|
3-pin Side of the Connected Signal Cable (Cable not included) |
|
1
|
Pr (Color differential signal) |
|
2
|
Pb (Color differential signal) |
|
3
|
Y (Luminance signal) |
| This monitor supports High-Speed Certified USB 2.0 interface. |
 |
| |
Data Rate |
Power Consumption |
| High speed |
480 Mbps |
2.5W (Max., each port) |
| Full speed |
12 Mbps |
2.5W (Max., each port) |
| Low speed |
1.5 Mbps |
2.5W (Max., each port) |
|
USB Upstream Connector
|
Pin Number
|
4-pin Side of the Connector |
|
1
|
DMU |
|
2
|
VCC |
|
3
|
DPU |
|
4
|
GND |
USB Downstream Connector
|
Pin Number
|
4-Pin Side of the Signal Cable |
|
1
|
VCC |
|
2
|
DMD |
|
3
|
DPD |
|
4
|
GND |
USB Ports
- 1 upstream - rear
- 4 downstream - 2 on rear; 2 on left side
 |
NOTE: USB 2.0 capability requires 2.0 capable computer |
| |
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on, attached peripherals may take a few seconds to resume normal functionality. |
- The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
- The Flash Memory Card Reader is automatically recognized by Windows® 2000 and XP.
- Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
- All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
The Flash Memory Card Reader has the following features:
- Supports Windows 2000 and XP operating systems
- No Windows 9X support from Dell
- Mass Storage Class device (No drivers are required under Windows 2000 and XP)
- USB-IF certification
- Supports various memory card media
|
Slot Number
|
Type of Flash Memory Card |
|
1
|
Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.0 bus |
|
2
|
Smart Media Card (SMC)
Memory Stick Card (MS) / High Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter)
Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter)
MultiMedia Card (MMC) / Reduced Size MultiMedia Card (with Adapter)
|
| Connection type |
USB 2.0 High Speed Device (USB Full Speed Device compatible) |
| Supported OS |
Windows 2000 and XP |
| Transfer Speed |
Read: 480 Mb/s (max.)
|
| |
Write: 480 Mb/s (max.) |
| You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings; but in most cases, monitor installation is automatic. |
E-mail a friend about this item.
Continue shopping
|
