Dell™ 2007WFP Flat Panel Monitor
| 1 |
Input indicators |
| 2 |
Input Source Select |
| 3 |
PIP (Picture In Picture) / PBP (Picture By Picture) Select |
| 4 |
OSD Menu / Select |
| 5 |
Down (-) |
| 6 |
Up (+) |
| 7 |
Power button (with power light indicator) |
| 1 |
VESA mounting holes (100mm)
(Behind attached base plate) |
Use to mount the monitor.
|
| 2 |
Connectors label |
Indicate the positions and types of connectors. |
| 3 |
Barcode serial number label |
Refer to this label if you need to contact Dell for technical support. |
| 4 |
Security lock slot |
Use a security lock with the slot to help secure your monitor. |
| 5 |
Monitor Lock/Release Button |
Press to release the stand from the monitor. |
| 6 |
Regulatory rating label |
List the regulatory approvals. |
| 7 |
Dell Soundbar mounting brackets |
Attach the optional Dell Soundbar. |
| 8 |
Lock down/release button
|
Push the monitor down, press the button to unlock the monitor,
and then lift the monitor to the desired height. |
| 9 |
Cable management hole |
Help organize cables by placing them through the hole. |
Right side
|
Left side
|
| 1 |
USB upstream port |
| 2 |
USB downstream ports |
| 3 |
DC power connector for Dell™ Soundbar |
| 4 |
DVI connector |
| 5 |
VGA connector |
| 6 |
Composite video connector |
| 7 |
S-Video connector |
| 8 |
AC power cord connector |
General
|
|
| Model number |
2007WFP |
|
|
|
| Screen type |
Active matrix - TFT LCD |
| Screen dimensions |
20.1 inches (20.1-inch viewable image size) |
| Preset display area: |
|
Horizontal
|
433.4 mm (17.0 inches) |
Vertical
|
270.9 mm (10.7 inches) |
| Pixel pitch |
0.258 mm |
| Viewing angle |
+/- 89° (vertical) typ, +/- 89° (horizontal) typ
|
| Luminance output |
300 cd/m ²(typ)
|
| Contrast ratio |
800:1 (typ)
|
| Faceplate coating |
Antiglare with hard-coating 3H
|
| Backlight |
CCFL (6) edgelight system |
| Response Time |
16ms typical
|
|
|
|
| Horizontal scan range |
30 kHz to 81 kHz (automatic) |
| Vertical scan range |
56 Hz to 76 Hz, exception 1680 x 1050 at 60 Hz only |
| Optimal preset resolution |
1680 x 1050 at 60 Hz |
| Highest preset resolution |
1680 x 1050 at 60 Hz |
|
|
|
| Video display capabilities (DVI playback) |
480p/576p/720p (Supports HDCP) |
| Video display capabilities (Composite playback) |
NTSC/PAL |
| Video display capabilities (S-Video playback) |
NTSC/PAL |
|
Dell™ guarantees image size and centering for all preset modes listed in the following table.
| Display Mode |
Horizontal Frequency (kHz) |
Vertical Frequency (Hz) |
Pixel Clock (MHz) |
Sync Polarity (Horizontal/Vertical) |
| VGA, 720 x 400 |
31.5 |
70.1 |
28.3 |
-/+ |
| VGA, 640 x 480 |
31.5 |
59.9 |
25.2 |
-/- |
| VESA, 640 x 480 |
37.5 |
75.0 |
31.5 |
-/- |
| VESA, 800 x 600 |
37.9 |
60.3 |
40.0 |
+/+ |
| VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
| VESA, 1024 x 768 |
48.4 |
60.0 |
65.0 |
-/- |
| VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
| VESA, 1152 x 864 |
67.5 |
75.0 |
108.0 |
+/+ |
| VESA, 1280 x 1024 |
64.0 |
60.0 |
108.0 |
+/+ |
| VESA, 1280 x 1024 |
80.0 |
75.0 |
135.0 |
+/+ |
| VESA, 1680 x 1050 (Digital) |
64.6 |
59.9 |
119 |
-/+ |
| VESA, 1680 x 1050 (Analog) |
65.3 |
60.0 |
146.25 |
-/+ |
|
|
|
|
| Video input signals |
Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance
S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input impedance
Composite, 1 volt(p-p), 75 ohm input impedance |
| Synchronization input signals |
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green) |
| AC input voltage / frequency / current |
100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.) |
| Inrush current |
120V: 40A (Max.)
240V: 80A (Max.) |
Physical Characteristics
|
|
| Signal cable type |
D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor
S-video: Not included with display
Composite: Not included with display |
| Dimensions (with stand): |
|
Height (fully extended in portrait mode)
|
513.0 mm (20.2 inches) |
Height (compressed/locked in landscape mode)
|
332.0 mm (13.1 inches) |
Width
|
472.7 mm (18.6 inches) |
Depth
|
177.7 mm ( 7.0 inches) |
| Weight |
|
Monitor (Stand and Head)
|
6.5 Kg (14.3 lb) |
Monitor Flat panel only (VESA Mode)
|
5.0 Kg (11.0 lb) |
Weight with packaging
|
9.0 Kg (19.8 lb) |
|
|
|
| Temperature: |
|
Operating
|
5° to 35°C (41° to 95°F) |
Non-operating
|
Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F) |
| Humidity: |
|
Operating
|
10% to 80% (non-condensing) |
Non-operating
|
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing) |
| Altitude: |
|
Operating
|
3,657.6 m (12,000 ft) max |
Non-operating
|
12,192 m (40,000 ft) max |
| Thermal dissipation |
256.0 BTU/hour (maximum)
187.66 BTU/hour (typical) |
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature:
|
VESA Modes |
Horizontal Sync |
Vertical Sync |
Video |
Power Indicator |
Power Consumption |
| Normal operation |
Active |
Active |
Active |
Green |
75W (maximum)*
55W (normal)** |
| Active-off mode |
Inactive |
Inactive |
Blanked |
Amber |
Less than 2 W |
| Switch off |
-
|
-
|
-
|
Off |
Less than 1 W (at 230 V) |
|
* With Audio + USB
** Without Audio + USB |
| This monitor is ENERGY STAR®-compliant as well as TCO '99/ TCO '03 power management compatible. |
 |
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
VGA Connector
Pin Number |
15-pin Side of the Connected Signal Cable |
| 1 |
Video-Red |
| 2 |
Video-Green |
| 3 |
Video-Blue |
| 4 |
GND |
| 5 |
Self-test |
| 6 |
GND-R |
| 7 |
GND-G |
| 8 |
GND-B |
| 9 |
Computer 5V/3.3V |
| 10 |
GND-sync |
| 11 |
GND |
| 12 |
DDC data |
| 13 |
H-sync |
| 14 |
V-sync |
| 15 |
DDC clock |
DVI Connector
Pin Number |
24-pin Side of the Connected Signal Cable |
| 1 |
TMDS RX2- |
| 2 |
TMDS RX2+ |
| 3 |
TMDS Ground |
| 4 |
Floating |
| 5 |
Floating |
| 6 |
DDC Clock |
| 7 |
DDC Data |
| 8 |
Floating |
| 9 |
TMDS RX1- |
| 10 |
TMDS RX1+ |
| 11 |
TMDS Ground |
| 12 |
Floating |
| 13 |
Floating |
| 14 |
+5V / +3.3V power |
| 15 |
Self test |
| 16 |
Hot Plug Detect |
| 17 |
TMDS RX0- |
| 18 |
TMDS RX0+ |
| 19 |
TMDS Ground |
| 20 |
Floating |
| 21 |
Floating |
| 22 |
TMDS Ground |
| 23 |
TMDS Clock+ |
| 24 |
TMDS Clock- |
S-video Connector
Pin Number |
5-pin Side of the Connected
Signal Cable (Cable not included) |
| 1 |
GND |
| 2 |
GND |
| 3 |
LUMA |
| 4 |
CHROMA |
| 5 |
GND |
Composite Video Connector
| Pin Number |
1-pin Side of the Connected Signal Cable (cable not included) |
| 1 |
LUMA COMPOSITE CHROMA |
| This monitor supports High-Speed Certified USB 2.0 interface. |
 |
| |
Data Rate |
Power Consumption |
| High speed |
480 Mbps |
2.5W (Max., each port) |
| Full speed |
12 Mbps |
2.5W (Max., each port) |
| Low speed |
1.5 Mbps |
2.5W (Max., each port) |
|
USB Upstream Connector
Pin Number |
4-pin Side of the connector |
|
1 |
DMU |
|
2 |
VCC |
|
3 |
DPU |
|
4 |
GND |
USB Downstream Connector
Pin Number |
4-Pin Side of the Signal Cable |
|
1 |
VCC |
|
2 |
DMD |
|
3 |
DPD |
|
4 |
GND |
USB Ports
- 1 upstream - rear
- 4 downstream - 2 on rear; 2 on right side
 |
NOTE: USB 2.0 capability requires 2.0 capable computer |
|
|
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality. |
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic.
 |
CAUTION: Read and follow the
safety instructions before cleaning the monitor. |
|
|
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. |
- To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
- Use a lightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
- If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
- Handle your monitor with care as darker-colored plastics may scratch and show white scuff marks more than lighter-colored monitor.
- To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
E-mail a friend about this item.
Continue shopping
|
